Road Glide 2004 -2013 Archives - Glide Air Deflector System

GADS-PKG003 for Harley Davidson® Electra Glide through 2013, Various Road King Models

$55.95

GADS-PKG003 = GADS003 + GADSLTTD (not compatible with the Cast 2 piece spotlamp / turnsignal brackets) The GADS-PKG003 is a combination package of 2 different GADS products put together at a discounted price, sent in a single package. As a package they work as a set to deliver a better, more comfortable riding experience at a lower overall price. *The GADS003 normally will not fit the cvo regardless of year, they will usually require the EGADS. Look at the pictures to decide. Please contact the seller to help verify if necessary. Installation Instructions View Colors

GADS003

Electra Glide models through 2013, Road Kings and Freewheelers Through Current Models
GADS003 are very easy to install. The GADS003 mount using the bolts that come out of the triple tree of the motorcycle. On a Road King these are the bolts that hold the windshield, and or the spot lamp bracket. On an Electra Glide these are the bolts that hold the spot lamp bracket. The scallop goes up, the angle of the deflector goes out and towards the rear of the motorcycle. Simply remove one bolt or nut at a time, loosely reinstall the nut or bolt then repeat the procedure with the second nut or bolt. You will have to bend the GADS003 to access the hardware but don’t let that bother you, the GADS003 are extremely flexible and will simply spring back into place. When you have the nuts or bolts back into place, torque to specifications. Do not over tighten as this may cause stress fractures ___________________________________________________________________ All GADS deflectors are made of Polycarbonate plastic and are extremely durable, they should give you many years of trouble free service. Bob the GADS guy

GADS LTTD

GADS Lower Triple Tree Deflector

This deflector installs to most touring platform H-D motorcycles through 2013
If you look at the back edge of your lower triple tree and see 3 little plastic plugs or holes this is where your deflector mounts The bolts that hold the the GADSLTTD on are 1/4”X20 tpi. The triple tree is pre-drilled and tapped to accept the included bolts. If there is any resistance when screwing in the bolts you need to chase the threads with a 1/4”-20 tap to remove any obstruction on the threads (paint,rust,etc.) GADS is a small cottage industry Thank you for your support Made in the U.S.A.

Select options This product has multiple variants. The options may be chosen on the product page Details
GADS-PKG002 for Harley Davidson® Road Glide Ultra Models 2004 – 2013

$53.95
GADS-PKG001 = GADS001 + GADSLTTD (with hard lowers) The GADS-PKG002 is a combination package of 2 different GADS products put together at a discounted price sent in a single box. As a package they work as a set to deliver a better, more comfortable riding experience at a lower overall price. Installation Instructions View Colors

GADS002

2004 -2013 RoadGlide
GADS are created using virtually indestructible polycarbonate. GADS have a mounting system that uses the turn signal mounts to hold the deflector in place. They sit between the mounting bracket and the inner fairing, virtually invisible from the outside of the fairing. The top of the mounting flange has a hole and a notch, allowing for adjustment. The top of the flange is horizontal and sits toward the center line of the motorcycle. The notch is for the rear bolt and the wiring. Keep the wiring in the notch, do not pinch the wiring. The hole is for the front mounting stud.

Remove protective film from GADS.

Cover the front fender with a towel to avoid scratches or dings.

Pick a side to install the GADS on, then remove the nuts that hold the front turn signal on but do not remove the signal yet as there are wires that power the signal.

Pull the turn signal studs loose from the fairing but do not pull the wires out of the fairing.

Slide the hole in the front of the deflector mounting flange between the mounting bracket and the inner fairing aligning the three holes. (inner fairing, GADS, fairing support bracket)

Loosely install turn signal CAUTION: DO NOT PINCH WIRING

The notch allows for a small amount of adjustment, pivot the deflectors toward the crash bar, recheck wiring, then tighten to torque spec. do not over tighten if installing GADS002 in front of lowers, install so the ploycarbonate cannot come into contact with the paint. GADS will bend a small amount under a wind load.

Move to the other side and repeat

GADS is a small cottage industry Thank you for your support Made in the U.S.A.

GADS LTTD

GADS Lower Triple Tree Deflector

This deflector installs to most touring platform H-D motorcycles through 2013
If you look at the back edge of your lower triple tree and see 3 little plastic plugs or holes this is where your deflector mounts The bolts that hold the the GADSLTTD on are 1/4”X20 tpi. The triple tree is pre-drilled and tapped to accept the included bolts. If there is any resistance when screwing in the bolts you need to chase the threads with a 1/4”-20 tap to remove any obstruction on the threads (paint,rust,etc.) GADS is a small cottage industry Thank you for your support Made in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page Details
GADS-PKG001 for Harley Davidson® Road Glide 2004 – 2013

$55.95
GADS-PKG001 = GADS001 + GADSLTTD The GADS-PKG001 is a combination package of 2 different GADS products put together at a discounted price sent in a single box. As a package, they work as a set to deliver a better, more comfortable riding experience at a lower overall price. Installation Instructions View Colors

GADS001

2004 -2013 RoadGlide
GADS are created using virtually indestructible polycarbonate. GADS have a mounting system that uses the turn signal mounts to hold the deflector in place. They sit between the mounting bracket and the inner fairing, virtually invisible from the outside of the fairing. The top of the mounting flange has a hole and a notch, allowing for adjustment. The top of the flange is horizontal and sits toward the center line of the motorcycle. The notch is for the rear bolt and the wiring. Keep the wiring in the notch, do not pinch the wiring. The hole is for the front mounting stud.

Remove protective film from GADS.

Cover the front fender with a towel to avoid scratches or dings.

Pick a side to install the GADS on, then remove the nuts that hold the front turn signal on but do not remove the signal yet as there are wires that power the signal.

Pull the turn signal studs loose from the fairing but do not pull the wires out of the fairing.

Slide the hole in the front of the deflector mounting flange between the mounting bracket and the inner fairing aligning the three holes. (inner fairing, GADS, fairing support bracket)

Loosely install turn signal CAUTION: DO NOT PINCH WIRING

The notch allows for a small amount of adjustment, pivot the deflectors toward the crash bar, recheck wiring, then tighten to torque spec. do not over tighten if installing GADS002 in front of lowers, install so the ploycarbonate cannot come into contact with the paint. GADS will bend a small amount under a wind load.

Move to the other side and repeat

GADS is a small cottage industry Thank you for your support Made in the U.S.A.

GADS LTTD

GADS Lower Triple Tree Deflector

This deflector installs to most touring platform H-D motorcycles through 2013
If you look at the back edge of your lower triple tree and see 3 little plastic plugs or holes this is where your deflector mounts The bolts that hold the the GADSLTTD on are 1/4”X20 tpi. The triple tree is pre-drilled and tapped to accept the included bolts. If there is any resistance when screwing in the bolts you need to chase the threads with a 1/4”-20 tap to remove any obstruction on the threads (paint,rust,etc.) GADS is a small cottage industry Thank you for your support Made in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page Details
GADS 002 for Harley Davidson® RoadGlide 2004 – 2013

$37.95
Glide Air Deflector System GADS is a new patent pending approach to a comfortable RoadGlide experience. The turbulence that you feel on your face, chest and torso is dramatically reduced and redirected. Many RoadGlide owners spend lots of money buying expensive replacement windshields trying to find relief from the aggressive buffeting which is the effect caused by the RoadGlide Ultra fairing. Testing has proved, it is not the wind coming over the windshield beating you up, but the wind that comes up from under the sides of the fairing past the turn signals that is abusing the rider with extremely turbulent air. If you have ever put your feet on the top of your crash bars at highway speed you have some idea how well GADS will work for you. GADS mount to the fairing support bracket between inner fairing and the fairing support bracket with a virtually invisable mounting system.(Will fit older RoadGlides if using updated turnsignals and relocated upper fairing.) GADS 002 designed to fit all Ultra Road Glide models and Road Glides set up as Ultras using late model Vented Lower Fairings and late model support brackets with late model Turn Signals. MADE IN THE USA Installation Instructions View Colors

GADS002

2004 -2013 RoadGlide
GADS are created using virtually indestructible polycarbonate. GADS have a mounting system that uses the turn signal mounts to hold the deflector in place. They sit between the mounting bracket and the inner fairing, virtually invisible from the outside of the fairing. The top of the mounting flange has a hole and a notch, allowing for adjustment. The top of the flange is horizontal and sits toward the center line of the motorcycle. The notch is for the rear bolt and the wiring. Keep the wiring in the notch, do not pinch the wiring. The hole is for the front mounting stud.

Remove protective film from GADS.

Cover the front fender with a towel to avoid scratches or dings.

Pick a side to install the GADS on, then remove the nuts that hold the front turn signal on but do not remove the signal yet as there are wires that power the signal.

Pull the turn signal studs loose from the fairing but do not pull the wires out of the fairing.

Slide the hole in the front of the deflector mounting flange between the mounting bracket and the inner fairing aligning the three holes. (inner fairing, GADS, fairing support bracket)

Loosely install turn signal CAUTION: DO NOT PINCH WIRING

The notch allows for a small amount of adjustment, pivot the deflectors toward the crash bar, recheck wiring, then tighten to torque spec. do not over tighten if installing GADS002 in front of lowers, install so the ploycarbonate cannot come into contact with the paint. GADS will bend a small amount under a wind load.

Move to the other side and repeat

GADS is a small cottage industry Thank you for your support Made in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page Details
GADS 001 for Harley Davidson® RoadGlide 2004 – 2013

$39.95
Glide Air Deflector System GADS is a new patent-pending approach to a comfortable RoadGlide experience. The turbulence that you feel on your face, chest and torso is dramatically reduced and redirected. Many RoadGlide owners spend lots of money buying expensive replacement windshields trying to find relief from the aggressive buffeting which is the effect caused by the RoadGlide Ultra fairing. Testing has proved, it is not the wind coming over the windshield beating you up, but the wind that comes up from under the sides of the fairing past the turn signals that is abusing the rider with extremely turbulent air. If you have ever put your feet on the top of your crash bars at highway speed you have some idea how well GADS will work for you. GADS mount to the fairing support bracket between the inner fairing and the fairing support bracket with a virtually invisible mounting system.(Will fit older RoadGlides if using updated turn signals and relocated upper fairing.) MADE IN THE USA Installation Instructions View Colors

GADS001

2004 -2013 RoadGlide
GADS are created using virtually indestructible polycarbonate. GADS have a mounting system that uses the turn signal mounts to hold the deflector in place. They sit between the mounting bracket and the inner fairing, virtually invisible from the outside of the fairing. The top of the mounting flange has a hole and a notch, allowing for adjustment. The top of the flange is horizontal and sits toward the center line of the motorcycle. The notch is for the rear bolt and the wiring. Keep the wiring in the notch, do not pinch the wiring. The hole is for the front mounting stud.

Remove protective film from GADS.

Cover the front fender with a towel to avoid scratches or dings.

Pick a side to install the GADS on, then remove the nuts that hold the front turn signal on but do not remove the signal yet as there are wires that power the signal.

Pull the turn signal studs loose from the fairing but do not pull the wires out of the fairing.

Slide the hole in the front of the deflector mounting flange between the mounting bracket and the inner fairing aligning the three holes. (inner fairing, GADS, fairing support bracket)

Loosely install turn signal CAUTION: DO NOT PINCH WIRING

The notch allows for a small amount of adjustment, pivot the deflectors toward the crash bar, recheck wiring, then tighten to torque spec. do not over tighten if installing GADS002 in front of lowers, install so the ploycarbonate cannot come into contact with the paint. GADS will bend a small amount under a wind load.

Move to the other side and repeat

GADS is a small cottage industry Thank you for your support Made in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page Details